thats crazy with that little driveshaft thingy for the s/c, looks like the install on it would be very easy for the whole setup though. how much are they wanting for a kit like that? do the import guys need to have an aftercooler?
I... think... I'm in looove.
- Thread starter TheOriginalJames
- Start date
Okay its a Honda.
You know Toyota is going to start racing NASCAR. What are they going to run a Camary? :rofl :funnah
You know Toyota is going to start racing NASCAR. What are they going to run a Camary? :rofl :funnah
Actually, Toyota has been racing for a long time. If Im not mistaken, Theyve been using their small c.i.d. v8 in thier baja trucks and I think even in NASTRUCK. So its really not a surprise to me that their thinking about running NASCAR. Plus, that means if they are going to run NASCAR, that they will have to mass produce a car to compete. I would kinda like to see that.
*edit* On another note, I wouldnt laugh too hard about the Camry. I bet the aerodynamics :rock Remember what happened when they discontinued the Tbird and started running the Taurus?? Lots of bitching b/c Ford was dominating with their new, more aerodynamic body at the time.
*edit* On another note, I wouldnt laugh too hard about the Camry. I bet the aerodynamics :rock Remember what happened when they discontinued the Tbird and started running the Taurus?? Lots of bitching b/c Ford was dominating with their new, more aerodynamic body at the time.
Re: RE: I... think... I'm in looove.
You removed the red thingy? :dunno
2000Si said:Well, that's because you don't know what you're looking at.
I'll give you a reference.
That's my engine bay as it sits right now.
Notice anything different in his?
You removed the red thingy? :dunno
Re: RE: I... think... I'm in looove.
Well on another tidbit note for all you mustangers. Ever wonder how Ford engineered such a nice mill like the 2 and 4 valve overhead cam engines they stick in the mustangs? They purchased the engine plans from Toyota.
Not a bad decision actually.
Bossman351 said:
Well on another tidbit note for all you mustangers. Ever wonder how Ford engineered such a nice mill like the 2 and 4 valve overhead cam engines they stick in the mustangs? They purchased the engine plans from Toyota.
Not a bad decision actually.
Re: RE: I... think... I'm in looove.
Vortec centrifugals are more expensive than roots blowers. It depends on the kit and what psi it's for, but I believe it's anywhere from 3000-5000. Aftercoolers help tremendously, but you don't really need it.
StangTang said:
Vortec centrifugals are more expensive than roots blowers. It depends on the kit and what psi it's for, but I believe it's anywhere from 3000-5000. Aftercoolers help tremendously, but you don't really need it.
Re: RE: I... think... I'm in looove.
got a linky? sounds interesting
Blackwater_GT said:
got a linky? sounds interesting
Re: RE: I... think... I'm in looove.
I read it in an issue of Mustangs and fast fords. The article was about the windage tray for the 4.7 ltr and the writer talked about the engineering of the motor and all that stuff. I dont know where he got his info from but I believe it since it was published.
sourlemon2k5 said:
I read it in an issue of Mustangs and fast fords. The article was about the windage tray for the 4.7 ltr and the writer talked about the engineering of the motor and all that stuff. I dont know where he got his info from but I believe it since it was published.
I never realized how large the 2V and the 4V motors were til I actually seen those things up close. The 4V looks like a damn big block.
Re: RE: I... think... I'm in looove.
Crazy thing is, the block is actually small in comparison to the old 5.0 or the Windsor. The size is all an illusion. The heads and intake are tall and wide, so it looks huge in the car. But take one out and strip it down to a short block and theres nothing there. :dunno
98LS1 said:
Crazy thing is, the block is actually small in comparison to the old 5.0 or the Windsor. The size is all an illusion. The heads and intake are tall and wide, so it looks huge in the car. But take one out and strip it down to a short block and theres nothing there. :dunno
What a waste of three cyber pages :rofl
Re: RE: I... think... I'm in looove.
how about the fact that the other cars in NASCAR have 6s from the factory....AND FWD.
Besides it will take them YEARS to get into Cup. They will have to start in truck for a few years to develop their program.
BTW - 2000si, I liked the s/c setup on teh V-tech.
Bossman351 said:
how about the fact that the other cars in NASCAR have 6s from the factory....AND FWD.
Besides it will take them YEARS to get into Cup. They will have to start in truck for a few years to develop their program.
BTW - 2000si, I liked the s/c setup on teh V-tech.
Re: RE: I... think... I'm in looove.
i used to draw a lot - i have some scans at home you can print out and hang up but nothing really good. the better stuff is mostly all hardcopy but i could scan more stuff when i get time
sourlemon2k5 said:
i used to draw a lot - i have some scans at home you can print out and hang up but nothing really good. the better stuff is mostly all hardcopy but i could scan more stuff when i get time
oh, and so i dont go off topic,
id like to add that i have nothing negative to say about si's link
j/k, its really cool actually. power is power
id like to add that i have nothing negative to say about si's link
j/k, its really cool actually. power is power
Re: RE: I... think... I'm in looove.
true...
:gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears
artisan00 said:
true...
:gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears :gears
hmmm... is this import learn time?
im curious whats the point of making a car look fast when its not.
and why would someone put a large spoiler on a front wheel drive car?
oh and are cavilers, escorts, and neons imports? :lol
im curious whats the point of making a car look fast when its not.
and why would someone put a large spoiler on a front wheel drive car?
oh and are cavilers, escorts, and neons imports? :lol
Re: RE: I... think... I'm in looove.
yes...
doh! no...
red plate said:
yes...
doh! no...
im sorry im a lazy retard.
Re: RE: I... think... I'm in looove.
lol, i was saying "doh!" like homer simpson... not "duh"
red plate said:
lol, i was saying "doh!" like homer simpson... not "duh"
Re: RE: I... think... I'm in looove.
That doesn't only happen with imports.
AND... not everyone wants a fast car, they just want a custom car and will spend money how they see fit. Granted a lot of guys that do that will rev and talk shit to anyone, but those guys are just morons.
red plate said:
That doesn't only happen with imports.
AND... not everyone wants a fast car, they just want a custom car and will spend money how they see fit. Granted a lot of guys that do that will rev and talk shit to anyone, but those guys are just morons.